Allied Data Technologies 811 Manual de Instalação descarregar pdf (Página 76)

Chapter 5: Configuring the CopperJet

5.18.2.3 Configuring MGCP Domain

-->voip set mgcp domain <domain> <Enter>

This command is used to identify the MGCP domain in which the Voice-IAD system is

situated. For example, by default the MGCP call agent configuration file entry for a phone

connected to a Voice-IAD system with IP address 192.168.88.25 would be:

aaln/1@[192.168.88.25]

The domain name in this example is ‘[192.168.88.25]’.

If you wish to override this setting, you can use this command to change the domain

name, for example test. The command:

-->voip set mgcp domain test <Enter>

This will result in endpoints such as ‘aaln/1@test’

5.18.2.4 Configuring MGCP eptypename

-->voip set mgcp eptypename <eptypename> <Enter>

This command is used to configure the MGCP Endpoint type name or eptypename.

For example, the MGCP call agent configuration file entry for a phone connected to a

Voice-IAD system with IP address 192.168.88.25 would be:

aaln/1@[192.168.88.25]

In this example, the eptypename is ‘aaln’. This is also the default setting.

Page 74

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 85 86

Sem comentários

Allied Data Technologies 811 Manual de Instalação Página 76